They are mostly used in wood construction such as outdoor decks, docks, footbridge, covered bridge etc. If you have furniture at home you would notice that different parts of it are connected through this bolt. If you have purchased a wooden outdoor play set for your child for instance, you will notice that the bolts used in this for fastening the parts together is a carriage bolt. The reason for its sturdiness is that the square collar fits into the hole of the wood keeping the whole bolt from turning around as it is being tightened by a wrench. So when it comes to industrial fasteners the carriage bolt is the most likely to use.These bolts have a threaded shaft that gets thinner at one end and the head is on the other end. In order to put two pieces of wood together, it has to be driven inside the wood by turning the head of the screw clockwise.

You then push the head of the bolt on the surface of the application. The threads are designed specifically to strengthen the clasping of the two woods by holding on to the wood during its entry.. Bolts are used with nuts and often with washers.When you want to do construction work you would need several materials like nails, screws, bolts, fasteners and the like. When you made a hole, slide the bolt into it, the threaded end has to be in the hole. The collar fits into the peppered hole or twist into the wood. This square section grips into the part being fixed to prevent the bolt from turning by itself when the nut is tightened. These fasteners are mainly used in making furniture because wood is compatible with this type of bolt.Carriage bolts are a good choice for making furniture out of wood although nails have been widely used, the bolts are a better choice to make the base of the furniture sturdier. This bolt is also known as a coach bolt, plow bolt or a lag bolt. The head also makes sure that the bolt will not go through the wood and acts like a nut on the other end. If you have yourself onto a decking Wholesale Heat Transfer Printing Factory project, you'll be going to a hardware store and stocking up on carriage bolts and deck screws.

Besides the strength and sturdiness that the carriage bolt provides for structures and wooden projects, it is also reliable since they will be able to withstand rust and corrosion and resisting moisture, chemicals and the elements.There are three type of bolts namely carriage bolts, stove bolts and machine bolts. So, how do you install a carriage bolt? You first have to measure the side of the bolt then you drill the appropriate size hole to your application. It is shaped like a countersunk head or a dome top shape and its shank is topped by a short square section under its head. You can either use them with zinc coating or galvanized coating, stainless steel or low carbon depending on what your constructing. This bolts are coarse threaded and are mostly available in certain diameters.